Safer footing and steady color around the pool
Pool Deck Paver Sealing in Hilliard, FL
Call (904) 980-0807 for a free pool deck paver sealing estimate anywhere in Hilliard.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can a contractor seal my Hilliard pool deck, and how soon will I hear back?
Yes, a local contractor can seal a pool deck anywhere in Hilliard, FL, and a reply reaches you within 1 business day, usually much sooner. The estimate costs nothing and you choose whether to book. To get started, call (904) 980-0807.
A pool deck takes harder use than a driveway. Splash water, sunscreen, chlorine and bare feet hit the same pavers every day, and Paver Ink, a Florida paver company, says each swim carries chlorine onto the deck. Sealing slows the color loss and keeps sunscreen and oils from soaking in. Tell a contractor how big the deck is and whether the pool sits under a screen when you send in the short form.
Paver Sealing Hilliard Is Proud to Serve Northeast Florida
Should pool deck pavers be sealed in Hilliard's heat and rain?
For most owners the answer is yes. Nassau County is humid subtropical, with a July average high of 90.6 degrees and about 49 inches of rain a year spread over roughly 109 days, according to Wikipedia. September is the wettest month at 6.91 inches. A deck that is soaked, baked and soaked again needs a surface that sheds water. Ask a contractor about your deck by calling (904) 980-0807.
Sun is the quiet problem. A Northeast Florida washing company says full sun, pool chlorine and storms can pull a reseal toward every two years, while two to three years is typical. That makes a pool deck the first surface on the property to need another coat. Describe how much shade yours gets when you send in the short form.
Which finish is safe for wet feet: matte, low sheen or wet look?
Pick for grip first and shine second. Unilock says high gloss sealer can be slippery when wet, and Paver Ink points to matte or low sheen near water and a grip additive in the top coat. Ask to see a small sample of each finish before you agree, and call (904) 980-0807 to set up that look.
Penetrating sealer
Soaks into the paver instead of sitting on top. A Northeast Florida price guide says it costs less up front, holds traction when wet and wears out sooner, which is why many pool decks get it.
Matte film sealer
Leaves a thin coat on the surface with a flat look close to the day the pavers were laid. It asks more of the contractor, because one spot layered twice dries with a different gloss.
Wet look sealer
Darkens and enriches the color with a visible shine. It looks rich in a photo, but the same shine is the reason to hold it back from the edge of the water.
What does the pool deck sealing process include?
Poolside work follows the same order every time, because sealer bonds to whatever is under it. A Northeast Florida washing company says sealing over dirt or wet pavers is how jobs go milky or fail. Here is the sequence, from the first look to the last walk-through. If any step worries you, ask about it when you call (904) 980-0807.
Look and measure
The contractor measures the deck, checks the coping and drains and notes where pavers rock or water stands.
Wash and treat
A surface cleaner washes the deck. Efflorescence cleaner goes on at low pressure, about 30 to 100 psi according to the paver industry association, and the final rinse is clear water.
Re-sand the joints
Dry sand is swept into every gap and the deck is left to dry. Unilock says shaded pavers can need about a day.
Coat and walk through
Sealer goes on in thin even passes with a sprayer and roller, and you hear how long to keep furniture and feet off.
What does it cost to seal a pool deck in Hilliard?
No page gives one price for a pool deck alone, so the table below is built from the published pieces. A washing company posts $1.75 to $3.25 per square foot to clean, sand and seal, and a price guide lists pool decks at $1.50 to $3.00. Stripping failed sealer adds $0.75 to $1.50 and new joint sand adds $0.25 to $0.75. To turn these into a number for your deck, send in the short form.
| Deck size | Typical example | Clean, sand and seal | Pool deck guide rate |
|---|---|---|---|
| 300 sq ft | Small lanai deck | $525 to $975 | $450 to $900 |
| 500 sq ft | Standard screened pool deck | $875 to $1,625 | $750 to $1,500 |
| 800 sq ft | Wrap-around deck with a patio | $1,400 to $2,600 | $1,200 to $2,400 |
| 500 sq ft add-on | Strip failed sealer first | $375 to $750 | added to the row above |
| 500 sq ft add-on | Replace joint sand | $125 to $375 | added to the row above |
These are multiplications of published per square foot figures, not quotes. A contractor sets the price after looking at the deck.
What are the orange streaks on my pool deck?
Check the sprinkler heads first. UF/IFAS says most Florida well water is high in iron and that irrigating with it leaves orange streaks and rust deposits on whatever it touches. Pressure makes those marks worse, and a rust treatment has to be done before any coat goes on. Show the pattern of marks to the contractor when you send in the short form.
What does soft ground mean for a pool deck near Hilliard?
Many Hilliard yards sit on flat sandy ground. USDA describes one Nassau County flatwoods soil, the Kingsferry series, as very poorly drained sand with a water table inside 12 inches of the surface for two to six months. Deck pavers that dip near the coping collect water, and sealer will not raise them. Ask whether leveling is included when you send in the short form.
Does a salt water pool or a screened lanai change anything?
A salt system changes the sealer, and a screen changes the sun. Paver Ink says salt is harder on a finish than chlorine, so the product should be rated for it. A screened deck gets less sun and more damp shade, and a price guide puts shaded areas nearer five years between coats. Mention both details when you call (904) 980-0807.
When is the right week to seal a pool deck?
Choose the weather, not the date. Unilock wants clear skies for 24 to 48 hours before, temperatures from 50 to 90 degrees with 75 the sweet spot, and sprinklers off, because water trapped under sealer leaves white marks. The same company says up to 48 hours of dry weather lets the coat cure. A washing company calls fall the drier season. Pick a window with a contractor when you send in the short form.
What do sealed pool decks look like around Hilliard?
Frequently Asked Questions
Do pavers around a pool need to be sealed?
No rule says they must be, but most pool owners choose it. Every swim carries chlorine, sunscreen and body oil onto the deck, and Paver Ink, a Florida paver company, says a sealed surface slows the color loss and keeps oils from soaking in. An open deck can still be cleaned, only more often.
Should pool deck pavers be sealed?
In sun and rain like Hilliard gets, usually yes. July highs average 90.6 degrees in Nassau County and about 49 inches of rain fall in a year, so a deck is wet, hot and splashed all summer. A coat gives the surface something to take that wear instead of the paver itself.
How much to seal a pool deck?
A Northeast Florida price guide lists pool decks at $1.50 to $3.00 per square foot, and a washing company posts $1.75 to $3.25 for the full clean, sand and seal. A 500 square foot deck lands near $750 to $1,625 across both. Size, old sealer and empty joints move the number.
Why is paver sealing so expensive?
Most of the bill is labor before any sealer goes on. The deck is cleaned, treated for stains, re-sanded and left to dry, and stripping old sealer adds $0.75 to $1.50 per square foot. Bids under $1 per square foot usually leave out some of that prep.
Is sealer slippery around a pool?
It can be. Unilock, a paver maker, warns that high gloss sealer gets slippery when wet, and Paver Ink says to pick a matte or low sheen finish near water. A grip additive in the top coat adds traction where bare feet walk.
Does sprinkler water stain a pool deck near Hilliard?
It can leave orange streaks if the irrigation draws from a well. UF/IFAS says most Florida well water is high in iron and that irrigating with it stains buildings. A rust treatment made for pavers comes first, and sealer follows only after the marks are gone.
Can a pool deck be sealed while pine pollen is in the air?
A contractor would rather wait or wash right before the coat. UF/IFAS says pine pollen lays on thick as yellow dust and tree pollen peaks in March and April. Sealer traps whatever is on the surface, so the deck must be clean and dry.
How long before the family can use the pool deck again?
Paver Ink says furniture and foot traffic stay off for the rest of the day, with the deck usually back to normal the next morning. Unilock wants dry weather for as long as 48 hours so the coat can cure. The contractor reads the label on the product used and gives you the exact time.
Does a salt water pool change the sealer choice?
It can. Paver Ink says salt is harder on a finish than chlorine, so the sealer should be rated for it. Say what kind of pool you have when you ask for a price, and the contractor can match the product.
Ready to get the pool deck sealed?
Call or send the short form, and a Hilliard-area contractor replies within 1 business day, usually much sooner.
Free, no obligation